World War II Navy Radio
TDE
Home | The Radioman's Job | My Receivers | Mill | Point to Point | My Transmitters | Remote Control | Radiotelephone | Portables | Test Equipment | Frequencies | Training | Procedures | Museum Activities | Museum Ships | On the Air Activities | Navy Television | Men Who Lived It | Resources | Hints and Kinks | Nancy(Infrared) | Wanted | Contact Me

NOTE - This is a re-creation of Rob Flory's original site which crashed some time ago - unfortunately some photos are still missing but most of the text is here - if you can help with any replacement photos, please send e-mail to Rob or to Nick K4NYW

Click here for Nick's 1950's-60's Navy Radio Pages -  www.navy-radio.com

TDE
 
The TDE, like the TBL, combines MF/HF in one package, but is more compact.  Frequency coverage is 300 to 1500kc and 1.5 to 18.1Mc. It runs off a motor-generator unit built into the base of the transmitter.  Unlike the TBL, this transmitter does not share RF tubes.  For MF, the TDE uses an 801 master oscillator, an 807 multiplier/amplifier, and an 803 power amplifier.  The tube lineup on HF is the same but with an 837 master oscillator.  Power output is rated at 135W CW, 35W MCW, and 30W AM.  An 801 audio amplifier and 5U4G bias rectifier are shared by MF and HF.
 
Mine is a TDE-3, CFN-52267-A made by Farnsworth with an acceptance date of 4-29-44.  It has a 220/440V, 3-phase, 60-cycle motor-generator.  Other models ran on 115VDC, 230VDC, or 110/220, 1-phase, 60 cycles.
 
 

tdefront.jpg
TDE-3 Transmitter

tdepowersupplyfront.jpg
TDE Power Supply

The picture above shows the inside of the TDE power supply unit.  The panel in the upper right corner is a modification to keep filaments lit in a standby mode.